What it welds
The Miller 951846 Multi-Process Welder is a multi-process with a maker-stated output of up to 235 amps on 240-volt input.
Miller's starting rule, 1 amp for each 0.001 inch of steel, puts 235 amps at roughly 0.235 in of steel in one pass; thicker work means bevels and more passes. Run the amperage selector.
The listing doesn't give a duty cycle with its amperage, which makes long beads hard to plan; the rating plate or manual should state it. Why it matters.
Processes, per the maker: not listed in detail. Most multi-process machines' TIG is DC lift-arc, so no aluminium unless AC is stated. Choosing a process.
Plan a 240-volt circuit sized as the manual states before it arrives. What input voltage changes.
Use a lens of at least OSHA's minimum shade for the current: shade 10 or darker for typical MIG work here. Shade chart.
Also on the listing: a weight of 135 lb.
Is it the right machine for the job?
Buy it for
- A shop that does a bit of everything
- Steel to about 0.235 in per pass
Skip it for
- Steel much past 0.235 in in one pass
What it does well, where it falls short
Does well
- Up to 235 A output
- Multi-process
Falls short
- Duty cycle not stated with amps
- Needs a 240 V circuit
- Torches may be extra
Power and setup notes
- Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.
Rated output and specs
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Model number | 951846 | Retailer |
|---|---|---|
| Product weight | 135 lb | Retailer |
| Output range | 235 Amp | Retailer |
| Input power | 240v | Retailer |
Machines to put next to it
Other multi-process welders in the same amp range
- YESWELDER 140A Multi-Process Welder
- YESWELDER 160A Multi-Process Welder
- ARCCAPTAIN 160A Multi-Process Welder
- YESWELDER FLUX-135PRO Multi-Process Welder
Every multi-process welders on one spec sheet · All Miller machines listed
Final verdict
Built for A shop that does a bit of everything.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure