What it welds
The YESWELDER 140A Multi-Process Welder is a multi-process with a maker-stated output of up to 140 amps on 110 or 220-volt input.
At its top output of 140 amps, Miller's 1-amp-per-thousandth rule points to about 0.140 in of steel per pass. Where the rule comes from.
The listing doesn't give a duty cycle with its amperage, which makes long beads hard to plan; the rating plate or manual should state it. Why it matters.
Processes, per the maker: Gas MIG/Flux Core. Most multi-process machines' TIG is DC lift-arc, so no aluminium unless AC is stated. Choosing a process.
Running on 120 or 240 volts, it trades output for convenience on the lower input. What input voltage changes.
Use a lens of at least OSHA's minimum shade for the current: shade 10 or darker for typical MIG work here. Shade chart.
Also on the listing: a weight of 22.8 lb.
Is it the right machine for the job?
Buy it for
- A shop that does a bit of everything
- Sheet metal to about 0.140 in
Skip it for
- Steel much past 0.140 in in one pass
What it does well, where it falls short
Does well
- Up to 140 A output
- Dual-voltage input
- Multi-process
Falls short
- Duty cycle not stated with amps
- Torches may be extra
Power and setup notes
- Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.
Rated output and specs
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Model number | 140A | Retailer |
|---|---|---|
| Product weight | 22.8 lb | Retailer |
| Size | 15.35×6.22×11.38 in | Retailer |
| Material | Aluminum, Copper, Electronic Components, Insulation Materials, Iron, Plastic | Retailer |
| Power | ac | Retailer |
| Input power | 110 volts, 220 volts | Retailer |
| Wattage | 3.6 KW | Retailer |
| Output range | 140 Amp | Retailer |
| Processes | Gas MIG/Flux Core | Retailer |
| Shielding gas | Gasless | Retailer |
Machines to put next to it
Other multi-process welders in the same amp range
- YESWELDER 160A Multi-Process Welder
- ARCCAPTAIN 160A Multi-Process Welder
- ARCCAPTAIN 165A Multi-Process Welder
- YESWELDER 165A Multi-Process Welder
Every multi-process welders on one spec sheet · All YESWELDER machines listed
Final verdict
Built for A shop that does a bit of everything.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure