What it welds
The YESWELDER TIG-200P ACDC AC/DC TIG Welder is an AC/DC TIG with a maker-stated output of up to 200 amps on 110 or 220-volt input.
By Miller's rule of thumb of 1 amp per 0.001 inch of steel, 200 amps reaches about 0.200 in in a single pass. Amps by thickness.
The maker's thickness claim reads "up to 1/8"".
The listing doesn't give a duty cycle with its amperage, which makes long beads hard to plan; the rating plate or manual should state it. Why it matters.
Processes, per the maker: tig, stick. Check which torches and guns come in the box; a TIG torch or spool gun is often extra. Process guide.
It's AC/DC, so it can weld aluminium as well as steel and stainless. Pulse: AC Pulse TIG.
Dual-voltage input gives portability on 120 volts and full output on 240; the maker's ratings for each input differ. 120 V vs 240 V.
Eye protection: OSHA's minimum is shade 8 for most of this machine's range (shade 10 for stick above 160 A). Full table.
Also on the listing: a weight of 31 lb.
Is it the right machine for the job?
Buy it for
- Aluminium and thin metal
- Steel to about 0.200 in per pass
Skip it for
- Steel much past 0.200 in in one pass
What it does well, where it falls short
Does well
- Up to 200 A output
- Dual-voltage input
- AC/DC for aluminium
- Pulse: AC Pulse TIG
Falls short
- Duty cycle not stated with amps
Power and setup notes
- Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.
Rated output and specs
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Model number | TIG-200P ACDC | Retailer |
|---|---|---|
| Product weight | 31 lb | Retailer |
| Power | ac_dc | Retailer |
| Input power | 110 volts, 220 volts | Retailer |
| Output range | 200 amps | Retailer |
| Max steel (maker) | up to 1/8" | Retailer |
| Processes | tig, stick | Retailer |
| AC / DC | dc tig | Retailer |
| Pulse | AC Pulse TIG | Retailer |
Machines to put next to it
Other tig welders in the same amp range
- AHP AlphaTIG 203Xi AC/DC TIG Welder
- Weldpro ACDC 250GD AC/DC TIG Welder
- Everlast Power Equipment PowerTIG-250EX AC/DC TIG Welder
- Everlast PowerTIG 210EXT AC/DC TIG Welder
Every tig welders on one spec sheet · All YESWELDER machines listed
Final verdict
Made for aluminium and thin metal.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure