AC/DC TIG · Everlast Power Equipment

Everlast Power Equipment PowerTIG 185DV AC/DC TIG Welder

AC/DC TIG, up to 185 A

Updated October 2026

Quick verdict

Made for aluminium and thin metal.

Strength
Up to 185 A output.
Trade-off
Duty cycle not stated with amps.
Right buyer
Aluminium and thin metal.
Output range
185 A
Input power
dual voltage
AC / DC
ac/dc
Pulse
pulse
Product weight
40 lb
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it welds

The Everlast Power Equipment PowerTIG 185DV AC/DC TIG Welder is an AC/DC TIG with a maker-stated output of up to 185 amps.

By Miller's rule of thumb of 1 amp per 0.001 inch of steel, 185 amps reaches about 3/16 in in a single pass. Amps by thickness.

The listing doesn't give a duty cycle with its amperage, which makes long beads hard to plan; the rating plate or manual should state it. Why it matters.

It's AC/DC, so it can weld aluminium as well as steel and stainless. Pulse: pulse.

Eye protection: OSHA's minimum is shade 8 for most of this machine's range (shade 10 for stick above 160 A). Full table.

Also on the listing: a weight of 40 lb.

Is it the right machine for the job?

Buy it for

  • Aluminium and thin metal
  • Steel to about 3/16 in per pass

Skip it for

  • Steel much past 3/16 in in one pass

What it does well, where it falls short

Does well

  • Up to 185 A output
  • AC/DC for aluminium
  • Pulse: pulse

Falls short

  • Duty cycle not stated with amps

Power and setup notes

  • Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.

Rated output and specs

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberPowerTIG 185DVRetailer
Product weight40 lbRetailer
Powerac/dcRetailer
Output range185 ARetailer
Input powerdual voltageRetailer
AC / DCac/dcRetailer
PulsepulseRetailer

Machines to put next to it

Other tig welders in the same amp range

Every tig welders on one spec sheet · All Everlast Power Equipment machines listed

Final verdict

Made for aluminium and thin metal.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How thick can the Everlast Power Equipment PowerTIG 185DV AC/DC TIG Welder weld?
By Miller's 1 A per 0.001 in rule its 185 A top output reaches about 3/16 in in one pass.
What is the Everlast Power Equipment PowerTIG 185DV AC/DC TIG Welder's duty cycle?
The listing doesn't state it with an amperage; check the rating plate or manual.