What it welds
The Weldpro 155GD Multi-Process Welder is a multi-process with a maker-stated output of up to 155 amps on 220-volt input.
By Miller's rule of thumb of 1 amp per 0.001 inch of steel, 155 amps reaches about 5/32 in in a single pass. Amps by thickness.
The listing doesn't give a duty cycle with its amperage, which makes long beads hard to plan; the rating plate or manual should state it. Why it matters.
Processes, per the maker: Spool Gun/ MMA/STICK. Most multi-process machines' TIG is DC lift-arc, so no aluminium unless AC is stated. Choosing a process.
Plan a 240-volt circuit sized as the manual states before it arrives. What input voltage changes.
Use a lens of at least OSHA's minimum shade for the current: shade 10 or darker for typical MIG work here. Shade chart.
Also on the listing: dimensions of 15.3 x 6.6 x 18 inches and a weight of 34.5 lb.
Is it the right machine for the job?
Buy it for
- A shop that does a bit of everything
- Sheet metal to about 5/32 in
Skip it for
- Steel much past 5/32 in in one pass
What it does well, where it falls short
Does well
- Up to 155 A output
- Multi-process
Falls short
- Duty cycle not stated with amps
- Needs a 240 V circuit
- Torches may be extra
Power and setup notes
- Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.
Rated output and specs
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Model number | 155GD | Retailer |
|---|---|---|
| Product weight | 34.5 lb | Retailer |
| Dimensions (seller) | 15.3 x 6.6 x 18 inches | Retailer |
| Size | 18.7 lb | Retailer |
| Material | Metal | Retailer |
| Power | gas_powered | Retailer |
| Input power | 220 V | Retailer |
| Wattage | 34.1 W | Retailer |
| Output range | 155 Amp | Retailer |
| Wire sizes | 030"/.035" | Retailer |
| Processes | Spool Gun/ MMA/STICK | Retailer |
| Spool gun | Spool Gun | Retailer |
| Shielding gas | Gasless | Retailer |
Machines to put next to it
Other multi-process welders in the same amp range
- FEMEROL MTC200PRO Multi-Process Welder
- YESWELDER 205A Multi-Process Welder
- PUWU CT-418PRO Multi-Process Welder
- ARCCAPTAIN MIG200 Multi-Process Welder
Every multi-process welders on one spec sheet · All Weldpro machines listed
Final verdict
Built for A shop that does a bit of everything.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure