What it welds
The ARCCAPTAIN MIG200 Multi-Process Welder is a multi-process with a maker-stated output of up to 200 amps on 110-volt input.
Miller's starting rule, 1 amp for each 0.001 inch of steel, puts 200 amps at roughly 0.200 in of steel in one pass; thicker work means bevels and more passes. Run the amperage selector.
The listing doesn't give a duty cycle with its amperage, which makes long beads hard to plan; the rating plate or manual should state it. Why it matters.
Processes, per the maker: Stick/MMA. Most multi-process machines' TIG is DC lift-arc, so no aluminium unless AC is stated. Choosing a process.
Household 120-volt power caps its output; check the circuit size the manual asks for. What input voltage changes.
Use a lens of at least OSHA's minimum shade for the current: shade 10 or darker for typical MIG work here. Shade chart.
Also on the listing: dimensions of 3.54 x 2.36 x 2.76 inches and a weight of 14.1 ounces.
Warranty, per the listing: 2-Year Manufacturer.
Is it the right machine for the job?
Buy it for
- A shop that does a bit of everything
- Steel to about 0.200 in per pass
Skip it for
- Steel much past 0.200 in in one pass
What it does well, where it falls short
Does well
- Up to 200 A output
- Runs on household 120 V
- Multi-process
Falls short
- Duty cycle not stated with amps
- 120 V caps output
- Torches may be extra
Power and setup notes
- Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.
Rated output and specs
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Model number | MIG200 | Retailer |
|---|---|---|
| Product weight | 14.1 ounces | Retailer |
| Dimensions (seller) | 3.54 x 2.36 x 2.76 inches | Retailer |
| Size | 20.9" x 8.5" x 16.1" | Retailer |
| Material | Metal+Plastic | Retailer |
| Power | dc | Retailer |
| Warranty | 2-Year Manufacturer | Retailer |
| Output range | 200a | Retailer |
| Input power | 110v | Retailer |
| Processes | Stick/MMA | Retailer |
| Spool gun | spool gun | Retailer |
| Shielding gas | Gasless | Retailer |
Machines to put next to it
Other multi-process welders in the same amp range
- PRIMEWELD CT520D Multi-Process Welder
- HITBOX HBT250P Multi-Process Welder
- PRIMEWELD CT520DP Multi-Process Welder
- ARCCAPTAIN MIG250 Multi-Process Welder
Every multi-process welders on one spec sheet · All ARCCAPTAIN machines listed
Final verdict
Built for A shop that does a bit of everything.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure