What it welds
The Hobart 770476 E7018 3/32 in Welding Electrodes is a rods.
Each electrode's packaging states its current range and positions. OSHA ties 60 to 160 amps to 3/32 to 5/32-inch rods, with a minimum shade 8. Shades for stick welding.
From the listing: size: 3/32 in; material: electrode stick.
Also on the listing: a weight of 10.3 lb.
Is it the right machine for the job?
Buy it for
- Stick welding
Skip it for
- Machines or torches it doesn't name
What it does well, where it falls short
Does well
- 3/32 in
- Electrode stick
Falls short
- Check fit before ordering
Power and setup notes
- Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.
Rated output and specs
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Model number | 770476 | Retailer |
|---|---|---|
| Material | Electrode stick | Retailer |
| Product weight | 10.3 lb | Retailer |
| Size | 3/32 in | Retailer |
Machines to put next to it
Other welding gear and consumables in the same amp range
- YESWELDER M-150 MIG Gun
- ARCCAPTAIN WP-17V Argon TIG Torch MIG Gun
- YESWELDER YW-TW2-15E MIG Gun
- Lincoln Electric PRO 100SG MIG Gun
Every welding gear and consumables on one spec sheet · All Hobart machines listed
Final verdict
A match for stick welding.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure