What it welds
The ARCCAPTAIN E71T-GS.030 in Welding Wire is a wire that its listing says fits various welding techniques.
Match wire diameter to the current: Miller's table puts.023 inch at 30 to 130 A,.030 at 40 to 145 A,.035 at 50 to 180 A and.045 at 75 to 250 A. Solid wire needs shielding gas; flux-cored wire shields itself. Amps and wire size.
From the listing: size: 10LB; material: 10lb.
Also on the listing: dimensions of 7.87 x 7.87 x 2.36 inches and a weight of 10.74 lb.
Is it the right machine for the job?
Buy it for
- Feeding a MIG machine
Skip it for
- Machines or torches it doesn't name
What it does well, where it falls short
Does well
- 10LB
- 10LB
- Fits various welding techniques
Falls short
- Check fit before ordering
Power and setup notes
- Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.
Rated output and specs
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Model number | E71T-GS | Retailer |
|---|---|---|
| Product weight | 10.74 lb | Retailer |
| Dimensions (seller) | 7.87 x 7.87 x 2.36 inches | Retailer |
| Size | 10LB | Retailer |
| Material | 10LB | Retailer |
| Fits | various welding techniques | Retailer |
Machines to put next to it
Other welding gear and consumables in the same amp range
- Forney 30305 3/32 in Welding Electrodes
- Forney 30686 1/8 in Welding Electrodes
- Hobart 770476 E7018 3/32 in Welding Electrodes
- YESWELDER M-150 MIG Gun
Every welding gear and consumables on one spec sheet · All ARCCAPTAIN machines listed
Final verdict
Made for feeding a MIG machine.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure