What it welds
The Miller 907709001 Stick Welder is a stick inverter; its listing doesn't state an output range, so check the rating plate.
The listing doesn't give a duty cycle with its amperage, which makes long beads hard to plan; the rating plate or manual should state it. Why it matters.
Use a lens of at least OSHA's minimum shade for the current: shade 8 or darker for typical TIG or stick work here. Shade chart.
Also on the listing: dimensions of 30.6 x 10.7 x 13.7 inches and a weight of 36 lb.
Warranty, per the listing: No Warranty.
Is it the right machine for the job?
Buy it for
- Farm and structural repairs
Skip it for
- Aluminium
What it does well, where it falls short
Does well
- Stick inverter
Falls short
- Duty cycle not stated with amps
- Slag cleanup
- Output range not stated
Power and setup notes
- Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.
Rated output and specs
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Model number | 907709001 | Retailer |
|---|---|---|
| Product weight | 36 lb | Retailer |
| Dimensions (seller) | 30.6 x 10.7 x 13.7 inches | Retailer |
| Warranty | No Warranty | Retailer |
Machines to put next to it
Other stick (arc) welders in the same amp range
- ZOJAN ARC140 Stick Welder
- YESWELDER 205Amp Stick Welder
- Sefaspe ARC 200Pro Stick Welder
- Lincoln Electric K1170 Stick Welder
Every stick (arc) welders on one spec sheet · All Miller machines listed
Final verdict
Made for farm and structural repairs.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure