What it welds
The Miller 907839 MIG Welder is a MIG / gas; its listing doesn't state an output range, so check the rating plate.
The listing doesn't give a duty cycle with its amperage, which makes long beads hard to plan; the rating plate or manual should state it. Why it matters.
It runs solid wire under shielding gas for the cleanest wire-feed welds; most machines like it also run flux-core wire outdoors.
Eye protection: OSHA's minimum is shade 10 for most of this machine's range. Full table.
Also on the listing: a weight of 47.6 lb.
Is it the right machine for the job?
Buy it for
- Clean steel welds indoors
Skip it for
What it does well, where it falls short
Does well
- Pulse: Pulse MIG
Falls short
- Duty cycle not stated with amps
- Output range not stated
Power and setup notes
- Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.
Rated output and specs
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Model number | 907839 | Retailer |
|---|---|---|
| Product weight | 47.6 lb | Retailer |
| Power | fuel_powered | Retailer |
| Input power | Dual Voltage | Retailer |
| Pulse | Pulse MIG | Retailer |
| Spool gun | spool gun | Retailer |
Machines to put next to it
Other mig and flux-core welders in the same amp range
- Hobart 500574001 MIG Welder
- TOOLIOM MIG-135 PRO Flux-Core Welder
- Lincoln Electric K5255-1 Flux-Core Welder
- PRIMEWELD MIG160 Flux-Core Welder
Every mig and flux-core welders on one spec sheet · All Miller machines listed
Final verdict
A match for clean steel welds indoors.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure